 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 Table of Contents Coversheet................................................................................................................................. 1 Table of Contents ....................................................................................................................... 2 Record of Revision..................................................................................................................... 3 1 General Specifications ........................................................................................................ 4 2 Input/Output Terminals ........................................................................................................ 5 3 Absolute Maximum Ratings ................................................................................................ 6 4 Electrical Characteristics..................................................................................................... 6 5 Timing Chart........................................................................................................................ 9 6 Optical Characteristics ...................................................................................................... 14 7 Environmental / Reliability Test ......................................................................................... 18 8 Mechanical Drawing.......................................................................................................... 19 9 Packing Drawing ............................................................................................................... 20 10 Precautions For Use of LCD Modules ........................................................................... 21 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 2 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 Record of Revision Rev 1.0 2.0 Issued Date 2009-05-22 2009-06-02 Description Preliminary Specification Release Final Specification Editor ZhenYing Zhang ZhenYing Zhang www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 3 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 1 General Specifications Feature Size Resolution Interface Color Depth Technology Type Display Spec. Pixel Pitch (mm) Pixel Configuration Display Mode Surface Treatment(Up Polarizer) Viewing Direction Gray Scale Inversion Direction LCM (W x H x D) (mm) Mechanical Characteristics Active Area(mm) With/Without TSP Weight (g) LED Numbers Electronic Driver IC 1.77 inch 128(RGB) x 160 CPU 8bits 65/262K a-Si 0.219x0.219 R.G.B. Vertical Stripe TM with Normally White Clear Type(3H) 6 o'clock 12 o'clock 34.0x47.0x2.4 28.032x35.04 Without TSP 6.2 2 LEDs HX8353-C Spec Note 1: Viewing direction for best image quality is different from TFT definition, there is a 180 degree shift. Note 2 : Requirements on Environmental Protection: RoHS Note 3 : LCM weight tolerance : +/- 5% www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 4 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 2 Input/Output Terminals 2.1 TFT LCD Panel Description Comment No Symbol I/O 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 LED1+ LED2+ LEDNC NRES D15 D14 D13 D12 D11 D10 D9 D8 NC NC NC NC NC NC NC NC NRD NWR RS NCS ID VCI GND XR YD XL YU GND Note2-1: P LED anode P LED anode P LED cathode - No Connection I Reset Pin I Data input I Data input I Data input I Data input I Data input I Data input I Data input I Data input - No Connection - No Connection - No Connection - No Connection - No Connection - No Connection - No Connection - No Connection I Read strobe I Write strobe I Register select I Chip select O ID Pin P Power supply P Ground P Touch panel coordinate in the right side of envisage drawing P Touch panel coordinate in the down side of envisage drawing P Touch panel coordinate in the left side of envisage drawing P Touch panel coordinate in the up side of envisage drawing P Power Supply of I/O Interface I/O definition: O---Output P----Power/Ground www..com I-----Input The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 5 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 3 Absolute Maximum Ratings 3.1 Driving TFT LCD Panel GND=0V,Ta = 25 Symbol VCI VCI D15~D8,NCS,RS,NWR,NRD Input Voltage NRES Back Light Forward Current ILED Operating Temperature TOPR Storage Temperature TSTG Item Logic Supply Voltage Analog Supply Voltage Min -0.3 -0.3 Max 3.7 3.7 Unit V V V mA For each LED Remark -0.3 VCI+0.3 -20 -30 20 70 80 4 Electrical Characteristics 4.1 Driving TFT LCD Panel GND=0V, Ta=25 Item Logic Supply Voltage Analog Supply Voltage Input Signal Voltage Low Level High Level Low Level High Level Symbol VCI VCI VIL VIH VOL VOH Black Mode (60Hz) (Panel+ LSI) Power Consumption Standby Mode Sleeping Mode Min 2.3 2.3 -0.3 Typ 2.8 2.8 Max 3.3 3.3 Unit V V Remark -- 0.2xVCI V VCI D15~D8,NCS,RS,NWR,NRD NRES V 0.8xVCI --- Output Signal Voltage -- 0.2xVCI V ID VCI ---V --- 0.8xVCI ----TBD TBD TBD www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 6 of 21 4.2 SHANGHAI TIANMA MICRO-ELECTRONICS Driving Backlight Item Forward Current Forward Current Voltage Backlight Power Consumption Symbol IF VF WBL Min ---Typ 15 3.2 96 Max ---- TM017FDH02 V2.0 Ta=25 Unit mA V mW Remark Note 1: The figure below shows the connection of backlight LED. Note 2: One LED : IF =15 mA, VF =3.2V Note 3: The Life of LED : 20,000 hours www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 7 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS 4.3 Block Diagram TM017FDH02 V2.0 LCD Driver Chip (COG) LCD PANEL RAM VCOM& D8~D15 Data Bus NCS, RS, NWR, 1.77 inch 128 (RGB) X160 Source+ Gate Driver TCON CPU I/F NRD,NRES Grayscale Manipulation Voltage DC/DC VCI GND FPC ID LED-, LED1+, LED2+ BLU Figure 3 LCD module diagram www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 8 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 5 Timing Chart 5.1 Timing Parameter Table 5.1 timing parameter Figure 5.1 i80 System Bus Timing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 9 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS 5.2 Register write/read timing in I80 series system a, Write to register TM017FDH02 V2.0 b. Read from register 5.3 GRAM write timing in i80 series system www..com Table 5.3 GRAM Data and display data of 8- bit(65K Color) system interface The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 10 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS GRAM Read/Write Timing TM017FDH02 V2.0 5.4 Reset Timing Characteristics Ta=25 Figure 5.4 NRES Timing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 11 of 21 5.5 SHANGHAI TIANMA MICRO-ELECTRONICS Power On/Off sequence 5.5.1 Power on Sequence TM017FDH02 V2.0 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 12 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS 5.5.2 Power off Sequence TM017FDH02 V2.0 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 13 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 6 Optical Characteristics Ta=25 Item Symbol Condition T View Angles B L R Contrast Ratio Response Time White Red Chromaticity Green Blue Uniformity NTSC Luminance CR TON TOFF x y x y x y x y U L Backlight is on =0 25 CR10 Min 45 15 40 40 200 0.238 0.258 0.554 0.295 0.284 0.450 0.095 0.061 70 200 Typ 50 20 45 45 350 30 0.288 0.308 0.604 0.345 0.334 0.500 0.144 0.111 80 40 250 Max 40 0.338 0.358 0.654 0.395 0.384 0.550 0.194 0.161 % % cd/m2 Note1 Note6 Note 5 Note1 Note7 Note5 Note1 ms Note1 Note3 Note1 Note4 Degree Note 2 Unit Remark Test Conditions: 1. 2. VF=3.2V, IF=15mA(One LED current), the ambient temperature is 25. The test systems refer to Note 1 and Note 2. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 14 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 Note 1: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 5 minutes operation, the optical properties are measured at the center point of the LCD screen. All input terminals LCD panel must be ground when measuring the center area of the panel. Photo detector Field 500mm TFT-LCD Module LCD Panel The center of the screen Item Contrast Ratio Luminance Chromaticity Lum Uniformity Response Time Photo detector Field SR-3A 1 BM-7A 2 Note 2: Definition of viewing angle range and measurement system. viewing angle is measured at the center point of the LCD by CONOSCOPE(ergo-80) www..com Fig. 1 Definition of viewing angle The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 15 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 Note 3: Definition of contrast ratio "White state ":The state is that the LCD should driven by Vwhite. "Black state": The state is that the LCD should driven by Vblack. Vwhite: To be determined Vblack: To be determined. Note 4: Definition of Response time The response time is defined as the LCD optical switching time interval between "White" state and "Black" state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 16 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 Note 6: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is placed at the center of each measuring area. Luminance Uniformity(U) = Lmin/ Lmax L-------Active area length W----- Active area width Fig. 2 Definition of uniformity Lmax: The measured maximum luminance of all measurement position. Lmin: The measured minimum luminance of all measurement position. Note 7: Definition of Luminance : Measure the luminance of white state at center point. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 17 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 7 Environmental / Reliability Test No 1 2 3 4 5 Test Item Condition Remark Note1 IEC60068-2-2,GB2423.2--89 IEC60068-2-1 GB2423.1--89 IEC60068-2-2, GB2423.2--89 IEC60068-2-1 GB2423.1--89 Note2 IEC60068-2-3, GB/T2423.3--2006 Start with cold temperature, End with high temperature, IEC60068-2-14,GB2423.22--87 IEC61000-4-2 GB/T17626.2--1998 High Temperature Ts=+70, 240hrs Operation Low Temperature Ta=-20, 240hrs Operation High Temperature Ta=+80, 240hrs Storage Low Temperature Ta=-30, 240hrs Storage High Temperature & High Humidity Ta=+60, 90% RH 240 hours Storage Thermal Shock -30 30 min~+70 30 min, (Non-operation) Change time:5min, 20 Cycles Electro Static Discharge (Operation) C=150pF, R=330,5points/panel Air: 8KV, 5times, Contact: 4KV, 5 times, Environment: 1535, 30%60%, 86Kpa106Kpa Frequency range:10~55Hz, Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X.Y.Z. (6 hours for total)(Package condition) 60G 6ms, X, Y, Z 3times, for each direction Height:80 cm, 1 corner, 3 edges, 6 surfaces 6 7 8 Vibration (Non-operation) IEC60068-2-6 GB/T2423.10--1995 IEC60068-2-27 GB/T2423.5--1995 IEC60068-2-32 GB/T2423.8--1995 Shock (Non-operation) Package 10 Drop Test 9 Note1: Ts is the temperature of panel's surface. Note2: Ta is the ambient temperature of sample. www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 18 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 8 Mechanical Drawing www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 19 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 9 Packing Drawing No Item Model (Material) Dimensions(mm) TM017FDH02 PET(Transmit) EPE 34x47x2.4 315x247x10.8 315x247x5 327x440 45x50 Unit Quantity Weight(Kg) 0.0062 0.0845 0.009 0.021 0.227 0.0035 1.01 1056 54 12 6 6 12 1 Anti-static Remark 1 LCM module 2 Tray 3 EPE 5 BOX 6 Desiccant 7 Carton 8 Total weight(Kg) 4 Anti-static bag PE Desiccant Corrugated Paper 345x260x70 Corrugated Paper 544x365x250 13.75 www..com The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 20 of 21 SHANGHAI TIANMA MICRO-ELECTRONICS TM017FDH02 V2.0 10 Precautions For Use of LCD Modules 10.1 10.1.1 10.1.2 Handling Precautions The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully. If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents: 10.1.3 10.1.4 10.1.5 Isopropyl alcohol Ethyl alcohol Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following: Water Ketone Aromatic solvents 10.1.6 10.1.7 10.1.8 Do not attempt to disassemble the LCD Module. If the logic circuit power is off, do not apply the input signals. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1 Be sure to ground the body when handling the LCD Modules. 10.1.8.2 Tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3 To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4 The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated. 10.2 Storage precautions 10.2.1 10.2.2 When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Relatively humidity: 80% The LCD modules should be stored in the room without acid, alkali and harmful gas. Temperature : 0 40 10.2.3 10.3 Transportation Precautions www..com The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine. The information contained herein is the exclusive property of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI TIANMA MICRO-ELECTRONICS Corporation. Page 21 of 21 |
Price & Availability of TM017FDH02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |